Saramonic SmartRig+ 2-Channel XLR/3.5mm Microphone Audio Mixer with Phantom Power Preamp & Guitar Interface for IOS Device iPhone iPad iPod DSLR Cameras Camcorders Android Smartphones

2 Independent Channels; Two XLR Microphone Inputs; Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs; Gain Control Knobs for Each Channel;
+48V Phantom Power Switch; Mono/Stereo Output Switch;

Saramonic SmartRig+ 2-Channel XLR/3.5mm Microphone Audio Mixer with Phantom Power Preamp & Guitar Interface for IOS Device iPhone iPad iPod DSLR Cameras Camcorders Android Smartphones

Description

The SmartRig+ makes your recording work easier by connecting professional microphones and guitars (or other instruments) to your smartphone, tablet, DSLR camera or video camera. 2 independent channels mean you can connect and Keep an eye on gain on more than one microphones or guitars on the same time. The interface also features 3 types of input to accommodate any set up: two XLR mic inputs, two 1/4″ (6.35mm) guitar inputs, and two 1/8″ (3.5mm) jack inputs for connecting any instrument or microphone. Outputs to an ordinary 1.8″ 3.5mm cable to be used with, smartphones, cameras and other devices.
Provides 48V phantom power for microphones, and features a 3.5mm headphone output for real-time sound monitoring. The two gain Keep an eye on thumbwheels make it easy to set precise levels.Toggle between Mono and Stereo output modes as important. Powered by one 9V battery.

Features:

1. 2 Independent Channels
2. Two XLR Microphone Inputs
3. Two 3.5mm (TRS) Microphone Inputs
4. Two 1/4″ Guitar Inputs
5. Gain Keep an eye on Knobs for Each and every Channel
6. +48V Phantom Power Switch
7. Mono/Stereo Output Switch
8. Output Switch for Smartphones (TRRS) or Camera/Camcorder/Recorder (TRS)
9. 3.5mm Headphone Output Jack for Monitoring

Specification:

1. Frequency Response: 20 Hz to 20 Khz, +/- 0.5 dB
2. Distortion: Not up to 0.01% @ 1 kHz, -30 dBu input
3. Signal to Noise Ratio: 80 dB @ 1 kHz, -30 dBu input
4. Gain: +20 dB to Infinity
5. Power Requirement: One 9V Alkaline or Lithium
6. Dimensions: 4.7 x 1.6 x 1.6″ /12 x 4 x 4cm
7. Weight: 130g/4.6 oz

Package Included:

1x Saramonic SmartRig+ 2-Channel XLR/3.5mm Microphone Audio Mixer
2 Independent Channels; Two XLR Microphone Inputs; Two 3.5mm (TRS) Microphone Inputs
Two 1/4″ Guitar Inputs; Gain Keep an eye on Knobs for Each and every Channel;
+48V Phantom Power Switch; Mono/Stereo Output Switch;
Output Switch for Smartphones (TRRS) or Camera/Camcorder/Recorder (TRS); 3.5mm Headphone Output Jack for Monitoring

Reviews

There are no reviews yet.

Be the first to review “Saramonic SmartRig+ 2-Channel XLR/3.5mm Microphone Audio Mixer with Phantom Power Preamp & Guitar Interface for IOS Device iPhone iPad iPod DSLR Cameras Camcorders Android Smartphones”

Your email address will not be published. Required fields are marked *