How to Use:
1. Turn on your amplifier or mixing board and set the volume regulate to minimum position , accommodate the volume regulate from low to high so obtained effect to your moderate level for protecting the sauna from pounding.
2.If the head of the microphone is covered by hand or brought close to the speaker, a howling sound is also generated . What you will have to do is decreasing the volume , making sure that there’s a sufficient distance between the microphone and the speaker.
3.The head of the microphone is sensitive. Don’t drop or hit it.
4.To care for the sensitivity and quality ,please keep away from exposing it to moisture and extreme temperature.
* Only work with device that could provide enough power for it. If your device could not provide enough power (When used with Amplifier or Mixer, and so forth.), the sound volume recorded might be low, and please use an extra 48V phantom power adapter to connect it (phantom power adapter isn’t included).
*If you wish to have better sound effect, a sound card could be used, it is not intended to be a microphone that plug into computer and use.
-Net weight: 240g/ 0.53lbs
-Body Dimension: 46*150mm/1.81″*2.9″
-Length of cable: Approx. 2.5m/0.098″
-Microphone Material: Metal
-Color: as the picture show
-Polar Pattern: Uni-directional.
-Frequency Response: 20Hz-16kHz
-Sensitivity: -38dB±2dB（0dB=1V/Pa at 1kHz）
-Output Impedance:150Ω±30%(at 1kHz)
-Load impedance: ≥1000 Ω
-Equivalent Noise level: 16dBA
-Max.SPL:130Db(at 1kHz<=1% T.H.D)
-Electrical current: 3mA
1 x Microphone
1 x Shock Mount
1 x Audio cable
1 x Anti-wind foam cap
Tailored frequency response 20Hz-20kHz, provides clear and high-fidelity vocal.
Neodymium magnet, recording without distortion, no bounce back.
Includes sturdy studio shock mount to reduces handling noise.
Features an angle adjustment with locking knob.
Great for radio broadcasting studio, voice-over sound studio, home recording, gaming and video chat.