Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Output Impedance:1500Ω±30%(at 1kHz)
Load impedance: ≥1000 Ω
Equivalent Noise level: 16dBA
Electrical current: 3mA
Microphone output interface: 3.5mm/0.14 Inch
Usage voltage: 48V phantom power supply
Wire: 3.5 inserted audio interface, 3 meters long
Microphone body weight: 0.51 LB
Size: Approx. 16 x 5 x 5cm/6.3 x 1.97 x 1.97 Inch
Microphone Material: Steel net + Zinc alloy hand holding part
1. The Condenser Microphone only works with the device that could provide enough power.
When connected with desktop computer, the Condenser Microphone may well be used one by one;
When connected with notebook computer, please connect the laptop to electrical outlet or use a 48V phantom power to get enough power if the sound isn’t clear and high enough.
2. If your device could not provide enough power(When used with Amplifier or Mixer,and the like.), the sound volume recorded could be low, in this conditions please use an extra 48V phantom power adapter to connect(phantom power adapter isn’t included).
3. Can not be used with mobile phone and tablet computer.
4. If you wish to have better sound effect, a sound card is needed.
5. Even as recording, please put the microphone away from the amplifier to prevent recording noise.
1x Black Microphone;
1x Power Cord;
1x Anti-wind foam cap;
1x User Manual
With Cardiod (undirectional) pickup pattern suppress feedback and low self-noise, it suitable for studios, recording studios, broadcasting stations, adage performance and computers.
Shock Mount to reduce handling noise, ideal for radio broadcasting studio, voice-over sound studio, recording, and the like.
With Standard screw adapter, you’ll be able to mount the Mic Shock Mount on all of the standard microphone stands.
Tailored frequency response provides vocal intelligibility, crispness and Neodymium magnet for high signal-to-noise ratio.
The Condenser Microphone only works with the device that could provide enough power.